Hur bra är Quaife

Allt om Fords modeller Escort, Orion, Scorpio och Sierra.
el_ias

Hur bra är Quaife

Inlägg av el_ias »

Hej! Letar ny drevsats till min bil(Escort Cosworth) och undrar nu även om en quaife drevsats är att rekommendera kan få den för lite lägre pris än fixit satsen.
Vilken av dom är bäst?
Någon som testat?
MVH Elias

Användarvisningsbild
therealpinto
Legend
Inlägg: 10768
Blev medlem: sön jul 27, 2003 9:08 pm
Namn: Gustaf Ulander
Kör: Capri Turbo, Capri, Cortina, Kuga ST-Line, Mach-E LR AWD, Sierra 2.9, inte XR4x4 (snyft!)
Ort: Kåge, Norrland
Medlemsnummer: 37
Kontakt:

Inlägg av therealpinto »

När jag rotade i detta åt en kompis för några år sedan, så ville Quaife inte rekommendera sina egna drevsatser till MT-75 för de som åker på strippen. Då menade de att deras prylar främst var till för rally - de hänvisade till Fixit... ;-)

/Gustaf
I'm on a NCHB diet. No Carb High Boost

el_ias

Inlägg av el_ias »

therealpinto skrev:När jag rotade i detta åt en kompis för några år sedan, så ville Quaife inte rekommendera sina egna drevsatser till MT-75 för de som åker på strippen. Då menade de att deras prylar främst var till för rally - de hänvisade till Fixit... ;-)

/Gustaf
Okej, av vilken anledning? Jag kommer åka både på strippen och stadskörning och bana så lite av varje. MVH Elias

Användarvisningsbild
Cossy_Calle
Legend
Inlägg: 2789
Blev medlem: fre okt 17, 2003 12:00 pm
Namn: Carl-Johan Andersson
Kör: RS Ford
Ort: Lidköping

Inlägg av Cossy_Calle »

el_ias skrev:Okej, av vilken anledning? Jag kommer åka både på strippen och stadskörning och bana så lite av varje. MVH Elias
Då ska du åka fixit, finns inget vetigt alternativ om du vill ha hållbarhet och låg serviskostnad,

Mvh Calle
________________________

el_ias

Inlägg av el_ias »

Cossy_Calle skrev:Då ska du åka fixit, finns inget vetigt alternativ om du vill ha hållbarhet och låg serviskostnad,

Mvh Calle
okej, då vet jag.

Användarvisningsbild
mojje
Veteran
Inlägg: 300
Blev medlem: tis apr 29, 2008 9:05 am
Namn: Morgan A
Kör: supra eurospec 1100nm edition, escort cossie,
Ort: skaraborg

Inlägg av mojje »

här kommer lite info så får du se lite mer hur det funkar och vad som finns

vad jag läst mig till så säljer/sålde dome fixits drevsaster eller ? så på bilderna så är det fixit drev vi ser antar jag.

Escort Cosworth Drivetrain
For the specification of the Escort Cosworth drivetrain check out the transmission specs.

The standard drivetrain in the Escort Cosworth is good as long as you stay at the standard power and don't misuse it every chance you get. In the category misuse there's mainly one thing that will kill the gearbox and other drivetrain components faster than anything else and that is standing starts on surfaces with good traction (dry concrete and asphalt). Since there is no wheelsspin on such surfaces the shock and torque when you let go off the clutch rather abruptly must be taken up by the drivetrain. That takes it's toll after a while. Also changing gears at high revs faster than the gearbox was designed to will shorten its lifespan. Such shift-maneuvers will break and wear out the synchro-rings.
The MT75 gearbox is also very slow to change compared to many of the cars made today. The MT75 gearbox is a very old design. It only utilizes a one-piece synchro between each gear. This is most obvious when changing between 1st and 2nd gear due to the large difference in speed between the two gears. Modern gearboxes usually uses a two-piece synchro that greatly reduces the time required to change gear.

What breaks ?
The components that will let go first in the gearbox itself are the second and third gear. Braking a first gear is very very rare due to the low gearing and the lack of time for engine torque to build up before having to change into second gear. Second and third gears are the weak links due to them being on the secondary shaft and therefore transfer of torque takes place from the primary to secondary shafts. The design of helical gears means they force themselves apart as they turn creating thrust forces against the end-bearings. With the and with increased torque in a tuned engine this wears them down and allows the gears to move apart. As this situation worsen less of the area of the gearteeth are in contact with the gear on the other shaft and failure occurs. Fourth gear is a 1:1 ratio straight through the gearbox and thus does not use any gears within the box. I have heard of one broken fifth gear due to the same reasons as with second and third but braking fifth is rare due to the smaller speed differential between the gears when changing from fourth to fifth.

Inputshafts for the MT75 gearbox. From left to right: Standard Escort Cosworth, Quaife uprated, Quaife Big tooth, DOME.

Two fifth gears for the MT75: From left to right: Quaife uprated, DOME.


Diffs and driveshafts
The front and rear diffs will also break if they're used real hard. The rear diff can be changed from the standard 7" to a 9" diff with housing and Limited Slip Diff from Ford. That should be enough for almost anything.
In the front diff the casing (diff housing) is relatively thin and under increased load it will flex. This flexing results in misalignment between the gears in the diff, this will sooner or later result in failure. An uprated front diff casing can be bought from Quaife. This cures the problem. This uprated diff-housing along with a Quaife ATB differential and uprated driveshaft-joints creates a virtually indestructible unit. Many 500+ HP cars use this setup with no problems.
Quaife ATB diffs: Autmatic Torque Biasing diffs. A type of torsen diff that distributes the most torque to the wheel with the most grip. Said to take at least 600lbft torque. This is due to the fact that there are no planet gears which are the weak points in the original diff itself. Requires rear diff casing to be machined. The machining is to remove enough of the casing to allow the diff to fit inside. The price is £685 + VAT for the diff, £85 for new bearings in the diff housing (recommended).
Normally the driveshafts and CV joints lasts for a while even though the front right side driveshaft can pop out. This is normally due to engine mount wear or excessive lowering.
There are two possible cures for that:
Don't lower your car so much.
Fit better engine mounts (Vibra Techincs Group A).
Some people also fit a longer driveshaft (available from Grahamgoode.com: GGR 722 Front o/s extended shaft), but that is not recomended because of this: A the suspension uses it's complete travel the longer shaft puts excessive pressure on the inner and outer CV-joints resulting in early failure.
The front prop-shaft usually fails after 100.000km somwhere. Or more correctly the bearings in the crosses fail due to the heat from the exhaust downpipe that passes very close to the propshaft. Remedy: Fit new crosses with lube-ports and inject new grease whenever you change the motor oil.

Clutches
The standard clutch can't handle much more than 330hp and the torque that comes with that. It might even slip at lower poweroutputs.
This is how it should be. It is a built-in safety margin by Ford that basically makes the clutch the weakest link in the drive train. Breaking a gearbox whilst using the standard clutch should not happen. Even at 330BHP with the correct uprated clutch, few gearbox problems should result from spirited driving. Obviously continued hard launches will drastically shorten the life of the clutch. Problems usually occur when paddle-type clutches are used in conjunction with the standard gearbox as this effectively moves the weakest link in the drive train from the clutch to the gearbox itself.
Replacement clutches are readily available in different specs from upgraded organic plates with standard Motorcraft covers, to 4 and 6-paddle sintered bronze ones with really agressive covers. The latter will not be much of a joy to drive in the city and when in heavy traffic as they engage very abrubtly. It's either in or it's out, there's no slipping. There are also multi-plated clutches but those aren't really needed. And they're expensive.

Possible gearbox upgrades

* Pete Doughty's DPE boxes: There was a lot of problems at first with these, but they are all fixed now with one car with 552hp having no problems even after a lot of full throttle launches.
You must deliver your standard gearbox to him and he does either a second and 3rd gear conversion or the second gear, 3rd gear and main shaft. The gearbox will be very noisy in second and third with the first option and in all gears except 4th with the second option due to the mentioned gears being straight cut.
The prices are £1800 + vat for 2nd & 3rd. £2200 + vat for 2nd, 3rd & main shaft.
Pete Doughty, Nothingham, England. Phone: 01159 262073
* DOME gearkit: This is a helically cut synchro gear kit produced by a Swedish company that also produces the gears for the McLaren F1 cars. Very strong (they have never had a gear brake) and uses the standard ratios. There are a number of different so called "Swedish" gearkits which are not all the same. Sweden has a number of engineering companies producing gear kits with varying degrees of quality.
* Quaife Uprated gearkit: This is quite like the DOME kit,but the gears are only slightly bigger than the standard gears. They are however heat treated and shot peened to increase strength.
* Quaife Big Tooth uprated gearkit: As above but with bigger teeth (stronger and noisier).
* R&D gearkit - has straight cut 1st, 2nd, + 3rd gears (all standard ratios). Cost is around £2200
* R&D 6 Speed Straight cut Dog engagement gearbox: This gearbox uses straight cut big tooth gears to dramatically increase strength. The design of straight cut gears actually forces them together so unlike helically cut gears. The engagement is by dog ring and not synchro, this allows a phenomenally fast change, basically only limited by how fast your hand can move the lever, you also don't need to use the clutch when gearing up, thus increasing the speed of the change even more. There is an excellent choice of ratios. Modificationsneeded to fit the box are: Clutch actuation must be hydraulic and by a center push bearing and the hole where the gearlever comes into the car needs to be made slightly bigger. The cost for the complete built gearbox is £4,750 + VAT. It is very loud due to the straight cut gears, but very strong.
* Fixit gearkit - from sweden.
* Quaife group A gearkit costs around £5000. It has different ratios (for rally), so limit's topspeed to something like 130-140 mph.
* Quaife group A gearbox, basically an MT75 with their gearkit already fitted, costs £7000.
* Quaife 6spd sequential gearbox - This is the ultimate gearbox upgrade from a performance standpoint of view. It is very very strong, doesn't need to be clutched and ratios can be had exactly as you want them.
As with everything really serious (solid) there are downsides:
1. The cost: £10.000+.
2. Driving it in the city and traffic can be a pain.
3. The dog-rings wears a lot faster than the synchro rings on a normal synchro-box. They may last 10.000km in road use, then it's out with the box and change the dog-rings.
4. Requires modifications to the tunnel, front diff and propshaft. Also requires modification to the clutch actuation.

Inputshafts for the MT75 gearbox. From left to right: Standard Escort Cosworth, Quaife uprated, Quaife Big tooth, DOME.

Two fifth gears for the MT75: From left to right: Quaife uprated, DOME.
Bilagor
5thGears.jpg
InputShafts.jpg

el_ias

Inlägg av el_ias »

tack för all info, inte världsbäst på engelska men vad jag fattar det som så är fixit ett bra alternativ?
Vad skulle du rekommendera Mojje om man inte vill lägga med än 40tusen på en drevsats?
Mvh

Användarvisningsbild
Extreme
Legend
Inlägg: 2413
Blev medlem: sön aug 17, 2003 5:34 pm
Namn: Fredrik N
Kör: Escort cosworth.Evo 6 TME.V70 R-Design 2011.A3 tfsi sportback quattro.
Ort: Utanför Linköping

Inlägg av Extreme »

el_ias skrev:tack för all info, inte världsbäst på engelska men vad jag fattar det som så är fixit ett bra alternativ?
Vad skulle du rekommendera Mojje om man inte vill lägga med än 40tusen på en drevsats?
Mvh
Du har inte många val,ska du åka mycket gata finns de inget bra med en dog box utan då är de fixit som gäller.quaife är inte lika hållbart som fixit,sen finns de ett antal dogg lådor med.Mullet/barra box som byggs av
Barra Motorsport och säls av bla Reyland.http://www.reyland.co.uk/Details.asp?ProductID=132
Finns även skyline gtr conversion hos reyland,Oppliger Motorsport har satser med både rakskuret och sned med liknande grad som fixit,och När jag pratar med Romain Oppliger om lådorna så håller de för 600hp och priset är helt ok....runt 20k för en låda om man skickar ner en org.

Användarvisningsbild
mojje
Veteran
Inlägg: 300
Blev medlem: tis apr 29, 2008 9:05 am
Namn: Morgan A
Kör: supra eurospec 1100nm edition, escort cossie,
Ort: skaraborg

Inlägg av mojje »

som Fredrik säger , inte mycket att välja på , eller det finns ju en hel del att välja på om man har duktigt med cash,
jag skall själv skaffa en annan låda inför vinters projekt och jag kollar ju mest åt fixit som jag ser det men nu när jag läst lite om Oppliger så verkar den ju mkt intressant för dom pengarna, dock på pappret så torde fixit vara en mer hållbar om Oppliger nu e specad för 600hk men säg det kostar 20000:- i köp "ihopmonterad och klar" och ca 5000:- i frakt ToR för resp lådorna så runt 25 lusar e ju onekligen bra pris.

Sedan har man ju /borde man ha bättre service om nu något skulle hända med lådan om du köper en fixit i sverige det e ju värt några spänn det med.

Användarvisningsbild
Extreme
Legend
Inlägg: 2413
Blev medlem: sön aug 17, 2003 5:34 pm
Namn: Fredrik N
Kör: Escort cosworth.Evo 6 TME.V70 R-Design 2011.A3 tfsi sportback quattro.
Ort: Utanför Linköping

Inlägg av Extreme »

mojje skrev:som Fredrik säger , inte mycket att välja på , eller det finns ju en hel del att välja på om man har duktigt med cash,
jag skall själv skaffa en annan låda inför vinters projekt och jag kollar ju mest åt fixit som jag ser det men nu när jag läst lite om Oppliger så verkar den ju mkt intressant för dom pengarna, dock på pappret så torde fixit vara en mer hållbar om Oppliger nu e specad för 600hk men säg det kostar 20000:- i köp "ihopmonterad och klar" och ca 5000:- i frakt ToR för resp lådorna så runt 25 lusar e ju onekligen bra pris.

Sedan har man ju /borde man ha bättre service om nu något skulle hända med lådan om du köper en fixit i sverige det e ju värt några spänn det med.
Frakten är långt ifrån så dyr,sen är de 6 månaders garagti hos Romain Oppliger,problemet är ju att ingen vet och har provat hur lådan är.Pratar man men han kan du nog ha en låda hemma för 20k ca

Användarvisningsbild
mojje
Veteran
Inlägg: 300
Blev medlem: tis apr 29, 2008 9:05 am
Namn: Morgan A
Kör: supra eurospec 1100nm edition, escort cossie,
Ort: skaraborg

Inlägg av mojje »

Extreme skrev:Frakten är långt ifrån så dyr,sen är de 6 månaders garagti hos Romain Oppliger,problemet är ju att ingen vet och har provat hur lådan är.Pratar man men han kan du nog ha en låda hemma för 20k ca
låter som ngt jag verkligen kan tänka mig att köpa, halva priset mot en fixit typ.

el_ias

Inlägg av el_ias »

mojje skrev:låter som ngt jag verkligen kan tänka mig att köpa, halva priset mot en fixit typ.
Hej! När ungefär hade du tänkt göra en beställning, skulle vara kul och höra hur den är. Finns det kanske några nordiska ford människor som har testat lådan? Vart ligger företaget?
mvh elias

Skriv svar